mostly for sarendipatree

[spacebug]

Big plaster mold that used to have big clay head in it.

After some chiseling.

After some more chiseling.
The whole thing should be out next week.

Comments

[dangerdhotrod.livejournal.com]

haha! it's totally right in the picture that the mold is being broken away. i'm retarded.

you know, if you had made that mold with a combination of smooth-on's brush-on silicones and their mother-mold plastics you could cast 100's of big heads before the mold would even _begin_ to deteriorate!

[spacebug.livejournal.com]

*product number here* has a pot life of about 4 minutes, and you can't expose it to moisture, so a good bet might be a silicon *product number with some letters here*, as that's a good all purpose one- but you need a special spray, you know, something like *product number here* would work well. And it'd have a durometer of 30 and a viscosity of eight million viscoparticles. That's about right, right? NIBBETS! Not the non-slarking narkocompfs- we'd defintiely need the slarking ones for that, and the *product number* mold release agent. We'd definitely need that, too, right?